ProCurve 2510G Series Informations techniques télécharger pdf (Page 131)

7-15

Interface Access and System Information

System Information

Reconfigure the Age Time for Learned MAC Addresses. This com-

mand corresponds to the MAC Age Interval in the menu interface, and is

expressed in seconds.

Syntax: mac-age-time <10 . . 1000000> (seconds)

For example, to configure the age time to seven minutes:

ProCurve(config)# mac-age-time 420

Configure the Time Zone and Daylight Time Rule. These commands:

■ Set the time zone you want to use

■ Define the daylight time rule for keeping the correct time when daylight-

saving-time shifts occur.

Syntax: time timezone <-720 . . 840>

time daylight-time-rule <none | alaska | continental-us-and-canada |

middle-europe-and-portugal | southern-hemisphere | western-europe |

user-defined>

East of the 0 meridian, the sign is “+”. West of the 0 meridian, the sign is “-”.

For example, the time zone setting for Berlin, Germany is +60 (zone +1, or 60

minutes), and the time zone setting for Vancouver, Canada is -480 (zone -8, or

-480 minutes). To configure the time zone and daylight time rule for Vancou-

ver, Canada:

ProCurve(config)# time timezone -480 daylight-time-rule

continental-us-and-canada

Configure the Time and Date. The switch uses the time command to con-

figure both the time of day and the date. Also, executing time without param-

eters lists the switch’s time of day and date. Note that the CLI uses a 24-hour

clock scheme; that is, hour (hh) values from 1 p.m. to midnight are input as

13 - 24, respectively.

Syntax: time [hh:mm[:ss]] [mm/dd/ [yy]yy]

For example, to set the switch to 9:45 a.m. on December 17, 2007:

ProCurve(config)# time 9:45 12/17/07

Note Executing reload or boot resets the time and date to their default startup values.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 411 412

Pas de commentaire

ProCurve 2510G Series Informations techniques Page 131