ProCurve 2510G Series Informations techniques télécharger pdf (Page 350)

100

101

C-8

Troubleshooting

Browser or Telnet Access Problems

Cannot Telnet into the switch console from a station on the network:

■ Telnet access may be disabled by the Inbound Telnet Enabled parameter in

the System Information screen of the menu interface:

2. Switch Configuration

1. System Information

■ The switch may not have the correct IP address, subnet mask, or gateway.

Verify by connecting a console to the switch’s Console port and selecting:

2. Switch Configuration

5. IP Configuration

Note: If DHCP/Bootp is used to configure the switch, see the Note, above.

■ If you are using DHCP to acquire the IP address for the switch, the IP

address “lease time” may have expired so that the IP address has changed.

For more information on how to “reserve” an IP address, refer to the

documentation for the DHCP application that you are using.

■ If one or more IP-Authorized managers are configured, the switch allows

inbound telnet access only to a device having an authorized IP address.

For more information on IP Authorized managers, see the Access Security

Guide for your switch.

1 2 ... 345 346 347 348 349 350 351 352 353 354 355 ... 411 412

Commentaires sur ces manuels

Pas de commentaire

ProCurve 2510G Series Informations techniques Page 350

Commentaires sur ces manuels