ProCurve 420 Informations techniques télécharger pdf (Page 52)

Using the HP Web Browser Interface

Tasks for Your First HP Web Browser Interface Session

Tasks for Your First HP Web Browser

Interface Session

The first time you access the web browser interface, there are a number of

basic tasks that you should perform:

■ Set the Manager user name and password

■ Set the SNMP community names

■ Set the primary Service Set Identifier (SSID)

■ Enable radio communications and select a channel

■ Change TCP/IP settings

■ Set radio security options

Changing the Manager User Name and Password in the

Browser Interface

You may want to change both the Manager (Administrator) user name and

password to enhance access security for the management interface on your

access point. The Manager user name and password allows full read/write

access to the web browser interface.

The access point also allows the configuration of an Operator user name and

password with read-only access. For more information, see “Modifying

Management User Names and Passwords” on page 5-3.

No t e If you want security beyond that achieved with user names and passwords,

you can disable access to the web browser interface. This is done by executing

no http server and no https server at the Management Configuration level

command prompt in the CLI. Then, management access is only from the CLI,

through the console port or Telnet, or through SNMP.

To set the user name or password with the web browser interface:

1. Click the Administration tab and then the

[User] button.

4-8

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 362 363

Pas de commentaire

ProCurve 420 Informations techniques Page 52