ProCurve 2610-PWR Informations techniques télécharger pdf (Page 252)

100

101

11-12

Power Over Ethernet (PoE) Operation

Viewing PoE Configuration and Status

Displaying an Overview of PoE Status on All Ports

For example, show management-brief displays this output:

Figure 11-3. Example of Show Management-Brief Output

Syntax: show power-management brief

Displays the following port power status:

• Port: Lists all PoE-capable ports on the switch.

• Power Enable: Shows Yes for ports on which PoE is enabled

(the default) and No for ports on which PoE is disabled.

• Priority: Lists the power priority (Low, High, and Critical)

configured on ports enabled for PoE. (For more on this topic,

refer to the command description on page 11-8.)

• Configured Type: Lists the type of PD connected to each port

(as configured by the user on the PD device). For example:

Telephone, Webcam, Wireless, Other.

• Detection Status:

– Searching: The port is trying to detect a PD connection.

– Delivering: The port is delivering power to a PD.

– Disabled: PoE support is disabled on the port. To re-enable,

refer to “Configuring PoE Operation” on page 11-7.

– Fault: The switch detects a problem with the connected PD.

• Power Class: Shows the 802.3af power class of the PD detected

on the indicated port (as configured by the user on the PD

device). Classes include:

0: 0.44w to 12.95w

1: 0.44w to 3.84w

2: 3.84w to 6.49w

3: 6.49w to 12.95w

reserved

Ports 1 through 4 are

delivering power.

The remaining ports

are available to

supply power, but

currently do not

detect a connected

PD.

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 468 469

Commentaires sur ces manuels

Pas de commentaire

ProCurve 2610-PWR Informations techniques Page 252

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel ProCurve 2610-PWR