ProCurve 2610-PWR Informations techniques télécharger pdf (Page 421)

100

101

C-25

Troubleshooting

Using Logging To Identify Problem Sources

Debug and Syslog Operation

You can direct switch debug (Event log) messages to these destinations:

■ Up to six SyslogD servers

■ One management-access session through:

• A direct-connect RS-232 console CLI session

• A Telnet session

• An SSH session

Figure C-8. Example of Debug Output to a Console CLI Session

Debug logging requires a logging destination (SyslogD server and/or a session

type), and involves the logging and debug destination commands. Actions you

can perform with Debug and Syslog operation include:

■ Configure the switch to send Event Log messages to one or more SyslogD

servers. Included is the option to send the messages to the user log facility

(default) on the configured servers, or to another log facility.

■ Configure the switch to send Event Log messages to the current manage-

ment-access session (serial-connect CLI, Telnet CLI, or SSH).

■ Disable all Syslog debug logging while retaining the Syslog addresses from

the switch configuration. This allows you to configure Syslog messaging

and then disable and re-enable it as needed.

■ Display the current debug configuration. If Syslog logging is currently

active, this includes the Syslog server list.

■ Display the current Syslog server list when Syslog logging is disabled.

1 2 ... 416 417 418 419 420 421 422 423 424 425 426 ... 468 469

Commentaires sur ces manuels

Pas de commentaire

ProCurve 2610-PWR Informations techniques Page 421

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel ProCurve 2610-PWR