ProCurve 2610-PWR Informations techniques télécharger pdf (Page 319)

ProCurve Stack Management

Configuring Stack Management

join the stack, assign IP addresses to these devices. Otherwise, IP

addressing is optional for Candidates and Members. (Note that once a

Candidate becomes a member, you can access it through the Commander

to assign IP addressing or make other configuration changes.)

4. Make a record of any Manager passwords assigned to the switches

(intended for your stack) that are not currently members. (You will use

these passwords to enable the protected switches to join the stack.)

5. If you are using VLANs in the stacking environment, you must use the

default VLAN for stacking links. For more information, see “Stacking

Operation with a Tagged VLAN” on page 8-45.

6. Ensure that all switches intended for the stack are connected to the same

subnet (broadcast domain). As soon as you connect the Commander, it

will begin discovering the available Candidates in the subnet.

• If you configured the Commander to automatically add Members

(Auto Grab = Yes), the first fifteen discovered Candidates meeting

both of the following criteria will automatically join the stack:

– Auto Join parameter set to Yes (the default)

– Manager password not configured

• If you configured the Commander to manually add Members

(Auto Grab set to No—the default), you can begin the process of

selecting and adding the desired Candidates.

7. Ensure that all switches intended for the stack have joined.

8. If you need to do specific configuration or monitoring tasks on a Member,

use the console interface on the Commander to access the Member.

Using the Menu Interface To View Stack Status and

Configure Stacking

Using the Menu Interface To View and Configure a

Commander Switch

1. Configure an IP address and subnet mask on the Commander switch.

(See the chapter on IP addressing in the Management and Configuration

Guide.)

2. Display the Stacking Menu by selecting Stacking in the Main Menu.

8-13

1 2 ... 314 315 316 317 318 319 320 321 322 323 324 ... 363 364

Pas de commentaire

ProCurve 2610-PWR Informations techniques Page 319