ProCurve 2610-PWR Informations techniques télécharger pdf (Page 327)

ProCurve Stack Management

Configuring Stack Management

2. To learn or verify the MAC address of the Member you want to move,

display a listing of all Commanders, Members, and Candidates in the

subnet by selecting:

2. Stacking Status (All)

You will then see the Stacking Status (All) screen:

For status descriptions, see the table on page 8-47.

This column lists the MAC

Addresses for switches

discovered (in the local

subnet) that are configured

for Stacking.

Using the MAC addresses for these

Members, you can move them between

stacks in the same subnet.

Figure 8-12. Example of How the Stacking Status (All) Screen Helps You Find

Member MAC Addresses

3. In the Stacking Status (All) screen, find the Member switch that you want

to move and note its MAC address, then press

[B] (for Back) to return to

the Stacking Menu.

4. Display the Commander’s Stack Management screen by selecting

4. Stack Management

(For an example of this screen, see figure 8-9 on page 8-19.)

5. Press

[A] (for Add) to add the Member. You will then see a screen listing

any available candidates. (See figure 8-10 on page 8-19.) Note that you

will not see the switch you want to add because it is a Member of another

stack and not a Candidate.)

6. Either accept the displayed switch number or enter another available

number. (The range is 0 - 15, with 0 reserved for the Commander.)

8-21

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 363 364

Pas de commentaire

ProCurve 2610-PWR Informations techniques Page 327